Vail Electronics on Twitter


Twitter Updates
  • Tweets for the current user name are unavailable. Please check the user name and try again.
 Vail Electronics News    
Author: Vail Electronics Created: 10/4/2010 11:48 AM RssIcon
News and information on the best in fire, security, and home automation.
By Vail Electronics on 3/5/2012 8:16 AM

We have installed several NAPCO I-See video cameras with great success.  The customers love the ability to see both interior and exterior cameras on their smart phones.  Get video clips sent to them when an alarm is triggered.  The video is stored remotely and is accessed through a monthly service.  The cameras have IR capability, so you can see both night and day. 

By Vail Electronics on 11/14/2011 3:50 PM
We just uploaded the Edwards Signaling Technology manual for the FS 1004 to our web site.  Manuals are located under the about us tab.  Feel free to use this manual for your needs.
By Vail Electronics on 10/8/2011 6:58 AM
Vail Electronics offers the following services: Home Automation, Home Electronics Integration, Home Theater service and Installation, Remote Controls, Home Media Rooms installation and service, low voltage structured cabling, Monitored Security Alarms System, Home Sound Systems, IP cameras with DVR, Integrated Access Control, Fire Alarm Installation and Inspection in the Steamboat, Oak Creek, Kremmling, Silverthorne, Breckenridge, Frisco, Dillon, Glenwood Springs, Vail, Eagle, Edwards, Wolcott, Glenwood Springs and Avon.  Our Service Technicians are factory trained and certified to ensure your electronics runs seamlessly.  Our home control and automation systems can control Lutron lighting, Radio Ra, Home Works, April Air and many other systems.  We install simple amplified audio systems such as a Denon AVR and tuners to the most complex Elan G! Home control system and sound systems.  Call us for a free, no obligation analysis of your needs at 970 827 9120.

By Vail Electronics on 10/8/2011 6:35 AM
Check out this link.   We test each security device installed and verified the alarm was sent.  Motion detectors are to be walk tested to verify coverage.  Unfortunately, ADT "free" alarm contracts do not let customers cancel wtih out paying the entire balance.  You get what you pay for in a security system.
By Vail Electronics on 9/22/2011 3:20 PM

We just uploaded the Vista 128 FB installation instruction from a recent fire alarm and security system project in Vail.  The system is comprised of 18 addresable smoke detectors, 3 addressable heat detectors.  Security system has 12 doors, 6 motion detectors, 3 carbon monoxide detectors and a Flo- Logic water detection and shut down system. 

By Vail Electronics on 9/18/2011 7:29 AM
Home owners often ask how often should the batteries be changed in their home fire alarm and security system.  The answer is not that simple: Some batteries need to be changed as required by code, some batteries are changed by manufacturers recommendation.


The battery in your monitored fire alarm should be changed according to NFPA 72 recommended maintenance schedule of 5 years from the date of manufacturer. In most cases 5 years from date of manufacture that works out to 4 years from date of installation.  By the time the battery is shipped to the wholesaler, and shipped to the installer, several months of the batteries 5 year life is lost.  


Security alarm devices such as door contacts and water detectors have different types of batteries and need replaced on different schedules.  Most recessed door contacts have long life lithium batteries and are good for 15 years.  Other surface mount door contacts with the same lithium battery are only good for 3 years.  Water bugs and low...
By Vail Electronics on 9/10/2011 10:02 AM


Elan G! home automation system integrated into Vail Electronics office in Avon Co.  Integrated systems include security alarm system, Lutron lights, April Air thermostats and 3 zones of music.

By Vail Electronics on 9/1/2011 3:18 PM

We took over the monitoring of an older Moose z1100 monitored security alarm system today.  We had to default the panel by powering down the system, pressing the S2 switch while powering it up.  The Tech had to hand program the monitoring infomration into the security alarm system.  Pretty easy fix for old alarm system.

By Vail Electronics on 8/30/2011 5:12 PM

We have been installing several Sonos Home Sound systems.  Most of the installations have been replacing older equipment that did not have adequate wires in place to control the system.  This product is great for retrofits because it works off of the homes wireless router to control all aspects of the equipment:  volume, power, source select, etc..  Check it out at

By Vail Electronics on 10/4/2010 12:22 PM
I don't suppose any one would be interested in 6 rooms of distributed audio with up to seven sources for $3600? Ok what if that included individual touch screen control with metadata feedback? What else do you want, speakers? I'm feeling generous...Call Vail Electronics at 970-827-9120.